• ZJ-DR125
      One component pre curing thermal conductive silicon gel

      ZJ-DR125 is a single component thermal conductive silicon gel, which is suitable for bonding and heat dissipation of various automotive electronic equipment, communication equipment, network terminal equipment, electronic and electrical equipment and modules.

      Product features

      1. One component silicon gel, without mixing and curing;

      2. High thermal conductivity and low thermal resistance;

      3. High surface stickiness, reworkable;

      4. Soft, stress free, easy to compress;

      5. Medium thickness, approximately 0.1-1mm;

      6. No settlement, no flow, and can fill any uneven gap.

      Product parameters
      Main parameters of ZJ-DR125
      Project

      ZJ-DR125

      		 Testing standards

      Extrusion rate,mL/min

      25

      		 30mL EFD syringe for gluing, pressure 621kPa

      Density，g/cm3

      2.8

      GB/T 533

      Offset under different forces

      @ 0.0060MPa

      @ 0.0100MPa

      @ 0.0175MPa

      @ 0.0300MPa

      @ 0.0480MPa

      Shifting，%

      30

      40

      50

      60

      70

      ASTM C165

      Minimum adhesive layer thickness，mm

      0.10

      /

      Thermal conductivity，W/m·K

      2.5

      ISO 22007-2

      Total mass loss Outgassing Outgassing (TML)，%

      0.12

      ASTM E595

      Specific heat capacity，J/g·K

      1

      ASTM E1269

      Working temperature，℃

      -55~200

      /

      Volume resistivity，Ω·cm

      1×1014

      GB/T 1692
      Flame retardant grade

      V0

      UL 94
      RoHS standard Conform to

      /
      Storage period, months

      18

      /
      The data in the table is for reference only, please refer to the measured data
      Operation and Safety
      • ZJ-DR125 is a fully cured material that does not require any curing process and can be applied through automated equipment with air supply.
      • Safety instructions:
      • Zhijiang ZJ-DR125 is a single component thermal conductive silicon gel, which contains neither toxic substances nor corrosive substances. Special handling precautions may be required, and general industrial hygiene regulations should be followed.
      • Hazard indications/safety recommendations/transportation rules:
      • Wear protective gloves for long-term or repeated contact.
      • Keep away from heat sources/sparks/open flames, prohibit smoking, and keep the container closed. Use explosion-proof electrical/ventilation/lighting equipment.
      • Transport according to non hazardous materials.
      Color and packaging

      300mL/piece or packaged according to customer requirements

      Storage and expiration date

      Sealed storage at room temperature, cool and ventilated conditions.

      【网站地图】【sitemap】